75XX Syscon

From Technologic Systems Manuals

The Syscon is an FPGA core that presents various configuration registers for the board. These registers are accessed through the SBUS. For example, to read the "Model ID" register:

ts7500ctl --address=0x60 --peek16

See the SBUS page for more details on using the SBUS in your application.

Offset Bits Access Function
0x60 15-0 Read Only Model ID
0x62 15 Read/Write Green LED (1 = on)
14 Read/Write Red LED (1 = on)
13 Read/Write RTC SCL input
12 Read/Write RTC SDA input
11 Read/Write RTC SCL direction (1 - output)
10 Read/Write RTC SDA direction (1 - output)
9 Read/Write RTC SCL output
8 Read/Write RTC SDA output
7-4 Read Only Board submodel
3-0 Read Only FPGA revision
0x64 15-0 Read Only 16-bits of random data changed every 1 second.
0x66 15-12 Read Only DIO input for pins 40(MSB)-37(LSB)
11-8 Read/Write DIO output for pins 40(MSB)-37(LSB)
7-4 Read/Write DIO direction for pins 40(MSB)-37(LSB) (1 - output)
3 Read/Write Lattice tagmem clock
2 Read/Write Lattice tagmem serial-in (RW)
1 Read/Write Lattice tagmem CSn
0 Read Only Lattice tagmem serial-out (RO)
0x68 15-0 Read Only DIO input for pins 36(MSB)-21(LSB)
0x6a 15-0 Read Only DIO output for pins 36(MSB)-21(LSB)
0x6c 15-0 Read/Write DIO direction for pins 36(MSB)-21(LSB) (1 - output)
0x6e 15-0 Read/Write DIO input for pins 20(MSB)-5(LSB)
0x70 15-0 Read/Write DIO output for pins 20(MSB)-5(LSB)
0x72 15-0 Read/Write DIO direction for pins 20(MSB)-5(LSB) (1 - output)
0x74 15-0 Write Only #Watchdog feed register
0x76 15-11 N/A Reserved
10-6 Read/Write PLL phase (set by TS-BOOTROM)
5 Read Only mode3 latched bootstrap bit
4 Read/Write Reset switch enable (1 - auto reboot when dio_i[9] == 0)
3-2 Read/Write scratch reg
1 Read Only mode2 latched bootstrap bit
0 Read Only mode1 latched bootstrap bit