From Technologic Systems Manuals
On all of our baseboards we include 2 indicator LEDs which are under software control. You can manipulate these using "ts4800ctl --greenledon --redledon" or "ts4800ctl --greenledoff --redledoff". The LEDs have 4 behaviors from default software.
|Green Behavior||Red behavior||Meaning|
|On||Off||System is booted and running|
|On||On for approximately 15s, then off||Once the system has booted the kernel and executed the startup script, it will check for a USB device and then determine if it is a mass storage device. This is used for updates/blasting through USB. Once it determines this is not a mass storage device the red LED will turn back off.|
|On||Turns on for 300ms, and then turns off for 10s||The watchdog is continuously resetting the board. This happens when the system cannot find a valid boot device, or the watchdog is otherwise not being fed. This is normally fed by ts4800ctl once a valid boot media has started. See the #Watchdog section for more details.|
|Off||Off||The FPGA is not able to start. Typically either the board is not being supplied with enough voltage, or the FPGA has been otherwise damaged. If a stable 5V is being provided and the supply is capable of providing at least 1A to the macrocontroller, an RMA is suggested.|
|On||On||The board is receiving too little power, or something is drawing too much current from the macrocontroller's power rails.|