TS-8100 ADC

From Technologic Systems Manuals

The Analog to Digital Converter consists of a 4-channel 16 bit sigma-delta converter and two, 2-channel analog switches. These are configured to allow input and conversion on two differential channels and 4 single ended channels. The 6-channel Analog to Digital signals are contained on connector HD5 which is a 16 pin (2x8) 0.1" spacing header. The connector layout and the signals carried by each pin are defined below. The input range for the differential input channels is 0- 2 VDC, and the input range on the single-ended channel is nominally 0-10 VDC.

Pinout Header
Pin Type Signal
1 Single ended Channel 6
2 N/A GND
3 Single ended Channel 5
4 N/A GND
5 Single ended Channel 4
6 N/A GND
7 Single ended Channel 3
8 N/A GND
9 N/A Not connected
10 N/A GND
11 Differential Channel 2-
12 Differential Channel 2+
13 N/A GND
14 Differential Channel 1-
15 Differential Channel 1+
16 N/A GND

TS-8100-ADC.png